DreamStation Go Heated Humidifier (DSGH) by Philips Respironics

CLEARANCE!

DreamStation Go heated humidifier brings you more comfort when you travel! DreamStation Go was designed so you can enjoy reliable, all-night humidification that’s engineered for ease and convenience, no matter where you go or how you get there.

System Overview
The DreamStation Go Heated Humidifier is composed of the following components:

• Heated humidifier - The heated humidifier is the primary source of humidification. Humidification is controlled by adjusting the temperature of the heater plate. The heater plate is then used to heat water found in the water tank.

• Water tank - The water tank stores the water that will be used by the heated humidifier.

Connecting to your DreamStation Go CPAP

• Remove the humidifier beauty panel from your DreamStation Go by pulling from either side of the panel.

• Line up the front of the therapy device to the front of the humidifier. Make sure the air outlet port on the therapy device lines up with the air inlet port on the humidifier.

• Slide the therapy device and humidifier together until they snap into place.

• Attach the tube to the heated humidifier.

• To access the humidifier settings in the Therapy Off menu, navigate to the My Comfort menu. From here you can view or adjust the following humidifier settings

Please Note:

• The DreamStation Go Heated Humidifier is specified for use with Philips Respironics DreamStation Go therapy devices only.

• The DreamStation Go Heated Humidifier is not supported for use with battery power. Only connect the CPAP and Humidifier together to receive therapy.